Brotherhood of Steel Metal License Plate Buying Guide: Sizes, Mounting, and Care

Quick Answer

For a Brotherhood of Steel license plate, choose a standard 12 x 6 inch metal plate if you plan to mount it on a vehicle, or a larger decorative banner if it's for a wall. Mount it with a frame or rubber-backed screws to prevent scratches, and clean it with mild soap and water. If you want a ready-to-hang Fallout metal license plate, the Fallout Brotherhood of Steel Canvas Banner is a strong alternative for indoor display.

So you want to show your allegiance to the Brotherhood of Steel on your car or in your garage. A metal license plate is an easy way to do that, but the details matter: size, mounting hardware, and how you care for the finish all affect how it looks and lasts.

This guide walks you through the practical decisions, from picking the right plate for your vehicle to keeping it clean. We'll also point out a few Fallout car accessories and collectibles that pair well with a Brotherhood of Steel license plate, so you can build a setup that feels cohesive.

Sizing: Standard Plates vs. Decorative Pieces

Most metal license plates sold for cars follow a standard size of about 12 by 6 inches, which fits typical US license plate frames and mounting holes. If you're buying a plate to actually put on a vehicle, confirm the dimensions before you order. A plate that's too large won't fit a standard frame, and one that's too small may rattle or look lost on a bumper.

For wall display, size is more flexible. Larger pieces like the Fallout Brotherhood of Steel Canvas Banner measure 41 by 24.6 inches, so they command a wall rather than a bumper. That's a different job entirely: a banner is for a garage, game room, or office, not for road use. Decide first whether you're decorating a vehicle or a space, because that choice drives everything else.

• Measure your existing plate and frame before buying a replacement.
• Check that mounting holes line up with your vehicle's bracket.
• For indoor display, a canvas banner can cover more wall area than a small metal plate.

Mounting a Metal License Plate Without Damage

Metal plates can scratch paint and rust if they're mounted metal-to-metal. Use a plastic or rubber license plate frame, or add rubber washers behind the plate, to create a buffer. Stainless steel screws are a good choice because they resist rust better than standard hardware. Tighten screws snugly, but don't overtighten, or you can crack the plate's coating or strip the threads.

If you're mounting on a front bumper that already has a bracket, test-fit the plate before tightening everything down. Some aftermarket plates have slightly different hole spacing, and a dry fit saves you from drilling new holes. For a secure, rattle-free install, consider a silicone plate holder, which also dampens vibration.

• Use rubber washers or a frame to protect your vehicle's paint.
• Choose stainless steel mounting screws to avoid rust stains.
• Test-fit the plate before final tightening to check hole alignment.

Caring for a Fallout Metal License Plate

A metal plate with printed or embossed graphics can fade or chip if you treat it like a bare metal bumper. Wash it with mild soap and water, then dry it with a soft cloth. Avoid abrasive cleaners, brushes, or pressure washers, which can strip the finish. If the plate is on a vehicle, a coat of car wax can add a layer of protection against road grime and UV rays.

For indoor display, dust the plate regularly with a microfiber cloth. If you live in a humid area, keep an eye out for rust on the edges, especially if the plate isn't sealed. A light application of metal polish on unprinted areas can help, but test it on a small spot first. Proper care keeps your Fallout license plate care routine simple and your plate looking sharp.

• Wash with mild soap and water; avoid abrasive cleaners.
• Dry immediately to prevent water spots and rust.
• Apply car wax to vehicle-mounted plates for UV and grime protection.

Coordinating Your Fallout Car Accessories

A license plate is often the first Fallout car accessory people buy, but it doesn't have to be the only one. If you want a cohesive look, consider a matching keychain, air freshener, or decal. For the interior, a small collectible like the Fallout Pip-Boy Limited Edition Lenticular Ingot - Health Variant by Fanattik can sit on your dashboard or in a cup holder, adding a subtle nod to the wasteland without blocking your view.

Apparel can also tie into your car's theme. The Fallout Nuka Orange Tee features the Nuka Orange label art on a 100% combed cotton jersey, so it's a comfortable way to show your fandom at a car meet or on a road trip. Pair it with a Brotherhood of Steel plate for a look that's unmistakably Fallout.

• Keep dashboard items small and secure so they don't become projectiles.
• Choose accessories that share a color palette with your plate for a unified look.
• Check local laws about obstructing your view before adding dashboard decor.

Decision Rules for Buying a Brotherhood of Steel License Plate

• If you're mounting on a vehicle: Choose a standard 12 x 6 inch metal plate and verify the mounting hole spacing matches your bracket. Use a frame or rubber washers to protect paint. Prioritize fit and rust-resistant hardware over design complexity.
• If you're displaying indoors: Size is flexible. A larger canvas banner like the Fallout Brotherhood of Steel Canvas Banner (41'' x 24.6'') can make a bigger impact on a wall than a small plate. Match the piece to your wall space and visual goal.
• If you want a cohesive Fallout car theme: Pair your plate with small interior accessories like the Pip-Boy ingot or apparel like the Nuka Orange Tee. Keep dashboard items secure. Build around a color or faction theme for a unified look.
• If you're concerned about care and longevity: Clean with mild soap and water, dry immediately, and apply wax to vehicle-mounted plates. Avoid abrasive cleaners and pressure washers. Simple routine care prevents fading, chipping, and rust.

Fallout Gear That Complements Your Plate

• Fallout Brotherhood of Steel Canvas Banner: Size (L x W): 41'' x 24.6''. Features the Brotherhood of Steel sword and gears design with the motto 'Ad Victoriam'. This large canvas banner is ideal for indoor display in a garage or game room, giving you a bigger Brotherhood statement than a standard license plate.
• Fallout Pip-Boy Limited Edition Lenticular Ingot - Health Variant by Fanattik: Limited edition metal collectible with a heavily embossed exterior and an alternating lenticular 'screen' that changes when tilted. A small, durable collectible that works as a dashboard or shelf accent, tying your Fallout car decor together without taking up much space.
• Fallout Nuka Orange Tee: Print on front of tee. Material: 100% combed cotton jersey. Tee Color: Orange. Unisex. Available in multiple sizes. A comfortable, unisex tee that lets you wear your Fallout fandom, perfect for car shows or casual outings where your license plate is on display.

Is a Brotherhood of Steel License Plate Right for You?

Best for

• Fallout fans who want to show faction pride on their car or in their garage.
• Car owners looking for a durable, metal accessory that can handle outdoor conditions with proper care.
• Collectors who want a functional piece of Fallout car decor that doubles as a display item.

Not for

• Anyone expecting a universal fit without checking their vehicle's mounting bracket.
• People who want a large wall statement piece; a canvas banner is a better choice for that.
• Those who won't maintain the plate; neglect can lead to fading or rust.

A Brotherhood of Steel license plate is a small but mighty way to bring Fallout into your daily drive or display shelf. Focus on fit, protect the finish, and care for it simply, and it'll serve you well for many miles or many years on the wall. Ad victoriam.