Start with the flag's real dimensions
The Fallout New California Republic Faction Flag is a 3' x 5' single-sided polyester flag with three grommets along one edge. Those numbers decide almost everything about your indoor display: how much wall you need, how many attachment points you are working with, and why the back of the flag will not match the front.
Measure your intended wall space before you buy hardware. A 3' x 5' flag covers a substantial rectangle, so a narrow strip between a door and a corner is usually a poor fit. Give the flag room to hang flat rather than wrapping around an inside corner.
Catalog details that drive the mounting plan
- Fallout New California Republic Faction Flag: Dimensions: 3' x 5' This is the footprint you must clear on the wall, and it sets the minimum span between your mounting points.

Fallout New California Republic Faction Flag - Fallout New California Republic Faction Flag: 3 grommets Three attachment points along one edge mean you can hang the flag from that edge; plan hardware around three points, not four corners.
- Fallout New California Republic Faction Flag: one-sided graphics The design reads correctly from the front. If the flag hangs where people see it from behind, the reverse will not show the same artwork.
- Fallout New California Republic Faction Flag: 100% polyester A lightweight synthetic fabric suits indoor hanging, but it also means you should keep sharp or abrasive hardware away from the cloth.
How to hang the NCR flag indoors
The supplied record confirms the grommets and dimensions but does not include a mounting method or load rating. The steps below are general indoor hanging practice, not a manufacturer instruction.
- Choose a wall that suits a one-sided flag: Pick a wall where the printed side faces the room. Avoid spots where the flag would be seen mainly from behind, since the reverse is not the display side.
- Mark the three grommet positions: Hold the flag up or measure the grommet spacing along its edge, then transfer those points to the wall. Three marks keep the flag from hanging crooked.
- Match hardware to the grommets and the wall: Use fasteners that pass through the grommets and are rated for your wall type. Because the record gives no load rating, choose hardware rated for more than the flag's weight and follow the fastener manufacturer's guidance.
- Hang from the grommet edge and check the drape: Attach all three points, then step back. Adjust tension so the flag hangs flat without pulling the grommets tight enough to distort the fabric.
Game room flag placement that works with a 3' x 5' print
- Above a low console or cabinet: A wide horizontal wall area lets the flag hang without furniture blocking the lower edge. Keep the bottom edge clear of items that could snag the polyester.
- On a dedicated game room wall: Treat the flag as the anchor piece and arrange smaller wall art around it rather than crowding the same rectangle.
- Away from direct heat and moisture: Bathrooms, kitchen splash zones, and spots above radiators are poor choices for a fabric flag. The record does not specify cleaning or heat tolerance, so prevention is the safer approach.
- Where sunlight will not wash out the front: The record does not state fade resistance. If the wall gets strong direct sun, consider a different spot or a UV-filtering window treatment.
Hardware choices and their tradeoffs
Because the flag has three grommets along one edge, you have two practical approaches: hang it flat against the wall from those three points, or suspend it from a rod using the same grommets. Flat hanging keeps the artwork closest to the wall and is the simpler indoor option. A rod gives a more finished look but adds a visible horizontal element and requires rod hardware that fits your grommet size.
Whichever route you take, avoid sharp hooks or bare wire that could abrade the polyester. The catalog does not confirm grommet material or diameter, so check the grommets on arrival and choose fasteners that sit cleanly through them.
Keeping the polyester print in shape
The supplied record does not include washing, ironing, or cleaning instructions. Do not assume the flag is machine-washable or safe to iron. For routine dust, a gentle approach such as a soft brush or a light vacuum with a brush attachment is a common starting point for synthetic fabric, but test on an inconspicuous area first and stop if the print or fabric shows any change.
Handle the flag by the edges rather than the printed center, and keep rings, keys, and tools away from the cloth while mounting. If you take the flag down seasonally, roll it rather than folding along the same lines repeatedly, and store it away from damp.
What the record does not settle before you buy
The catalog confirms the dimensions, the 100% polyester construction, the one-sided graphics, and the three grommets. It does not confirm grommet material, a weight, a maximum load, fade resistance, or care instructions. Those gaps matter if you plan to hang the flag in a bright window, suspend it from a single point, or clean it aggressively.
If any of those conditions describe your space, treat the flag as a display piece to be hung carefully and kept out of harsh conditions rather than an outdoor banner. The Fallout New California Republic Faction Flag is priced at USD 12.05 in the catalog, compared with a catalog comparison price of USD 17.99, which makes it a low-risk way to add NCR presence to a game room wall.

