How to Display Metal License Plates and Banners

Quick answer

Use adhesive hooks or magnetic strips for metal plates and lightweight hanging rods for canvas banners to avoid wall damage and keep your gaming wall art secure.

Step-by-step hanging guide

1. Choose the right hardware for the surface: For metal plates on drywall, use adhesive hooks rated for 5 lbs or magnetic strips if the plate is ferrous. For canvas banners, use a thin wooden dowel or spring rod inside the top hem so the weight distributes evenly. Avoid nails or screws unless you plan to patch holes later.
2. Mark placement with a level: Hold the plate or banner against the wall and use a pencil to lightly mark the top corners. Check with a spirit level so the edges align horizontally. Even a slight tilt will be noticeable on a long banner.
3. Attach the hardware securely: Peel and press adhesive hooks firmly onto clean, dry wall for 30 seconds. For magnetic strips, center them on the back of the plate. For banner rods, slide the rod through the hem and mount the brackets at the marked spots. Let adhesive cure for 1 hour before hanging anything on it.
4. Hang and adjust: Gently place the plate onto the hooks or magnets. For the banner, hook the rod ends into the brackets. Step back and make fine adjustments so the piece sits straight. If the banner sags, add a small binder clip at the bottom center to weigh it down.

Products used in this guide

• Fallout Series Brotherhood of Steel Metal License Plate: Rugged, and proudly battle-worn metal construction. The weight of the metal plate means you need a strong adhesive hook or magnetic strip rated for at least 2 lbs to avoid falls.

  

• Starfield Crimson Fleet Banner: Canvas with Crimson Fleet Jolly Roger flag design, size 18 x 41 in. The long, narrow canvas shape requires a mounting rod or two evenly spaced clips to prevent the banner from twisting or drooping.